start bit - определение. Что такое start bit
Diclib.com
Словарь ChatGPT
Введите слово или словосочетание на любом языке 👆
Язык:

Перевод и анализ слов искусственным интеллектом ChatGPT

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

  • как употребляется слово
  • частота употребления
  • используется оно чаще в устной или письменной речи
  • варианты перевода слова
  • примеры употребления (несколько фраз с переводом)
  • этимология

Что (кто) такое start bit - определение

FORM OF SERIAL COMMUNICATION LACKING SYNCHRONIZATION CONTROL SIGNALS
Asynchronous communications system; Start-stop transmission; Stop bit; Asynchronous serial; Start bit; Asynchronous start-stop; Start-stop signalling; Asynchronous serial protocol
  • order of data bits]], the presence or absence of a parity bit, the form of parity (even or odd) and the transmission speed must be pre-agreed by the communicating parties. The "stop bit" is actually a "stop period"; the stop period of the transmitter may be arbitrarily long. It cannot be shorter than a specified amount, usually 1 to 2 bit times. The receiver requires a shorter stop period than the transmitter. At the end of each character, the receiver stops briefly to wait for the next start bit. It is this difference which keeps the transmitter and receiver synchronized.

start bit         
<protocol> A bit which signals the start of transmission of a character on a serial line. For an RS-423 signal, the line is normally at logical zero which there is no data and the start bit is a logical one. The zero-one transition tells the receiver when to start sampling the signal to extract the data bits. [Is this upside-down?] (1995-02-02)
stop bit         
In serial communications, where each bit of the message is transmitted in sequence, stop bits are extra "1" bits which follow the data and any parity bit. They mark the end of a unit of transmission (normally a byte or character). For example, characters on an EIA-232 serial line may have one or two stop bits added. Some UARTs even allow for 1.5 stop bits but one is probably the most commonly used. A serial connection may be described as, for example, "8N1" which means eight data bits, no parity and one stop bit. (1995-01-24)
Asynchronous serial communication         
Asynchronous serial communication is a form of serial communication in which the communicating endpoints' interfaces are not continuously synchronized by a common clock signal. Instead of a common synchronization signal, the data stream contains synchronization information in form of start and stop signals, before and after each unit of transmission, respectively.

Википедия

Asynchronous serial communication

Asynchronous serial communication is a form of serial communication in which the communicating endpoints' interfaces are not continuously synchronized by a common clock signal. Instead of a common synchronization signal, the data stream contains synchronization information in form of start and stop signals, before and after each unit of transmission, respectively. The start signal prepares the receiver for arrival of data and the stop signal resets its state to enable triggering of a new sequence.

A common kind of start-stop transmission is ASCII over RS-232, for example for use in teletypewriter operation.